Still searching?learn more

Aerospatiale AS341/342 Gazelle Full Cover Set

Aerospatiale AS341/342 Gazelle Full Cover Set

Imágenes de los Productos:

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

CLICK on any small image to enlarge, or
CLICK on arrows to view next image

ID del producto

Nombre del producto

Precio Unitario

close= Bruce's Comments, Photos, Info & More.
= Product Photos, Etc.
= Items that have expedited delivery.

Cantidad

Carro

Productos:
Try Our New Product Filter
×

Only want to see some of our products?

Use the Product Filter Checkbox List to only see the products that interest you.

Section 1: Cockpit/Bubble Covers

2 Products, 6 Photos

A341-000

CUBIERTA DE BURBUJAS, CABINA ESTÁNDAR

$ 1080.00

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • La marca de registro de la aeronave (en los EE. UU .: el número N) se puede imprimir en este producto por $ 35 adicionales (en ambos lados).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Aerospatiale AS341/342 Gazelle Bubble Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... leer más

The Bubble Cover encloses the entire canopy including the windshield, skylights, and chin bubble Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. Both the top and bottom hems of the cover have a special rope-hem feature with which they can be tightened to help prevent abrasive chafing of the windshield. Pockets are sewn into the cover for the temperature probe and pitot tubes. The bubble cover is reinforced with patches at hinge points, door handles, and for the windshield wipers. For ease of installation, the bubble cover is color-coded (red=left, green=right) with color swatches sewn into the corners.... leer más

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... leer más

A341-010

CUBIERTA DE BURBUJAS, CABINA ESTIRADA

$ 1080.00

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • La marca de registro de la aeronave (en los EE. UU .: el número N) se puede imprimir en este producto por $ 35 adicionales (en ambos lados).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Aerospatiale AS341/342 Gazelle Bubble Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... leer más

The Bubble Cover encloses the entire canopy including the windshield, skylights, and chin bubble Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. Both the top and bottom hems of the cover have a special rope-hem feature with which they can be tightened to help prevent abrasive chafing of the windshield. Pockets are sewn into the cover for the temperature probe and pitot tubes. The bubble cover is reinforced with patches at hinge points, door handles, and for the windshield wipers. For ease of installation, the bubble cover is color-coded (red=left, green=right) with color swatches sewn into the corners.... leer más

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... leer más

Section 2: Engine/Tail Rotor Covers

7 Products, 13 Photos

A341-100

SEPARADOR DE PARTÍCULAS / CUBIERTA DE ESCAPE (MODELO ESTÁNDAR)

$ 505.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

A341-110

CUBIERTA DEL ÁREA DEL MOTOR

$ 530.00

Product Options & Information..............................................................................................................

  • La marca de registro de la aeronave (en los EE. UU .: el número N) se puede imprimir en este producto por $25 adicionales (en ambos lados).

Product Description................................................................................................................................

Engine Cover details vary by model, but generally these covers are designed to enclose and protect the swash plate, inlet, exhaust and engine access areas. They are designed to tighten up around the main rotor drive shaft and tailboom bottleneck areas, and attach securely with straps either under the belly or to the land gear cross tubes (or both). Delrin buckles are used to tighten the attachment straps. The engine cover is made of Solution-Dyed Polyester or acrylic Sunbrella, and is available in a variety of colors (contact us for details. Specific information for each model is available on request.... leer más

A341-120

SEPARADOR DE PARTÍCULAS / CUBIERTA DE ESCAPE (MODELO DE FILTRO DE ARENA)

$ 505.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

A341-300

CUBIERTA PRINCIPAL DEL CUBO DE ROTOR

$ 565.00

Product Options & Information..............................................................................................................

  • La marca de registro de la aeronave (en los EE. UU .: el número N) se puede imprimir en este producto por $25 adicionales (en ambos lados).

Product Description................................................................................................................................

Rotor Hub Covers overlaps with the Blade Covers to ensure complete protection for the entire main rotor system. Designed like a jacket with sleeves and no collar, the rotor hub cover fastens together below each blade with Delrin buckles. The Rotor Hub Cover is normally made from Solution-Dyed Polyester.... leer más

A341-400

CUBIERTAS DE HOJA (juego de 3)

$ 835.00

Product Options & Information..............................................................................................................

  • La marca de registro de la aeronave (en los EE. UU .: el número N) se puede imprimir en este producto por $25 adicionales (en ambos lados).

Product Description................................................................................................................................

Bruce’s Aerospatiale AS341/342 Gazelle Blade Covers are made of medium-weight Solution-Dyed Polyester and designed to avoid trim tabs or wicks. You can install Blade Covers from the ground with the aid of a lightweight rope attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. The Cold Weather Blade Covers are fitted with full-length zippers and optional deice “boots” designed to accept a preheater hose; a small opening at the tip of the cover allows for some air circulation and drainage in freezing weather. Some part numbers have features for an extra charge.... leer más

A341-410

CUBIERTAS DE HOJA (TIPO DE CLIMA FRÍO) (juego de 3)

$ 1135.00

Product Options & Information..............................................................................................................

  • La marca de registro de la aeronave (en los EE. UU .: el número N) se puede imprimir en este producto por $25 adicionales (en ambos lados).

Product Description................................................................................................................................

Bruce’s Aerospatiale AS341/342 Gazelle Blade Covers are made of medium-weight Solution-Dyed Polyester and designed to avoid trim tabs or wicks. You can install Blade Covers from the ground with the aid of a lightweight rope attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. The Cold Weather Blade Covers are fitted with full-length zippers and optional deice “boots” designed to accept a preheater hose; a small opening at the tip of the cover allows for some air circulation and drainage in freezing weather. Some part numbers have features for an extra charge.... leer más

A341-500

BLADE TIE-DOWNS (fabric type) (set of 3)

$ 285.00

Product Options & Information..............................................................................................................

  • La marca de registro de la aeronave (en los EE. UU .: el número N) se puede imprimir en este producto por $25 adicionales (en ambos lados).

Product Description................................................................................................................................

Blade Tie-Downs are "socks" which fit over the blade tip with or without Blade Covers installed. Front blade tie-downs have two lengths of rope or strap which attaches to the front cross tubes on either side of the cabin. The other tie-downs have generous lengths of rope or strap to tie the blades down at any convenient spot.... leer más

Section 3: Red Gear - Plugs, Pitot Covers, etc.

1 Product, 0 Photos

A341-130

TRANSMISSION COOLER INLET PLUG

$ 165.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • La marca de registro de la aeronave (en los EE. UU .: el número N) se puede imprimir en este producto por $25 adicionales (en ambos lados).

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your Aerospatiale AS341/342 Gazelle intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'Remove Before Flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black for an extra charge. Storage bag NOT included. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... leer más

Section 4: Tailboom Covers

2 Products, 6 Photos

A341-600

TAILFAN HOUSING COVER

$ 440.00

Product Description................................................................................................................................

The Tailboom Cover details vary by model, but generally the helicopter tail boom cover encloses the tail boom from the "bottleneck" to the aft end. They usually also cover the horizontal stabilizers, and are custom made to allow for antennae, lights, and other protrusions. They attach with straps underneath the tail boom. Covers for the vertical and horizontal stabilizers are also available separately. Specific information for each model is available on request.... leer más

A341-650

TAILBOOM COVER

$ 1335.00

Product Options & Information..............................................................................................................

  • La marca de registro de la aeronave (en los EE. UU .: el número N) se puede imprimir en este producto por $25 adicionales (en ambos lados).

Product Description................................................................................................................................

The Tailboom Cover details vary by model, but generally the helicopter tail boom cover encloses the tail boom from the "bottleneck" to the aft end. They usually also cover the horizontal stabilizers, and are custom made to allow for antennae, lights, and other protrusions. They attach with straps underneath the tail boom. Covers for the vertical and horizontal stabilizers are also available separately. Specific information for each model is available on request.... leer más

Section 7: Light Weight Products: Travel Covers and FlyAway Covers

2 Products, 0 Photos

A341-800

TRAVEL COVER, Light Weight Travel Bubble Cover, STANDARD CABIN

$ 865.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • La marca de registro de la aeronave (en los EE. UU .: el número N) se puede imprimir en este producto por $25 adicionales (en ambos lados).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Aerospatiale AS341/342 Gazelle Lightweight Travel Bubble Cover is the same design as our standard bubble cover, but the material used is very lightwieight and will fold up and store in a smaller space.... leer más

Travel Covers are made with Silver Solution-Dyed Polyester fabric and fully lined over the entire cover. The material is lightweight and more compact for easy stowage in the aircraft. The polyester material is water resistant, but only intended for occasional use outside. We also have an ultra lightweight material available for fitted hangar dust covers. For daily outdoor use, the non-travel Sunbrella Cover is the best choice.... leer más

A341-810

TRAVEL COVER, Light Weight Travel Bubble Cover, STRETCH CABIN

$ 865.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • Are there antennas that might affect this cover? We may contact you about filling out an antenna location worksheet.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • La marca de registro de la aeronave (en los EE. UU .: el número N) se puede imprimir en este producto por $25 adicionales (en ambos lados).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Aerospatiale AS341/342 Gazelle Lightweight Travel Bubble Cover is the same design as our standard bubble cover, but the material used is very lightwieight and will fold up and store in a smaller space.... leer más

Travel Covers are made with Silver Solution-Dyed Polyester fabric and fully lined over the entire cover. The material is lightweight and more compact for easy stowage in the aircraft. The polyester material is water resistant, but only intended for occasional use outside. We also have an ultra lightweight material available for fitted hangar dust covers. For daily outdoor use, the non-travel Sunbrella Cover is the best choice.... leer más

¿No encuentra lo que anda buscando? ¡Probablemente nosotros lo hacemos!
Nuestras oficinas están actualmente cerrados por Nuestras oficinas están cerradas durante el fin de semana.. Enviar un correo electrónico a bruce@aircraftcovers.com con información sobre sus aviones y el producto que está buscando!